wesbos/photo-frame-dashboard

选用指南

AI 根据 README 整理 · 2026/10/17 09:41:43

适用场景

适用于将特定型号的安卓相框（如PF1007L、BIUFRAME、Skylight Calendar等）改造为全屏网页仪表盘或自定义应用。

查看 README 依据

# Taking over Android photo frames Turn a cheap Android photo frame into a family dashboard: unlock it, root it, replace the vendor app, and run your own web page full screen. **TLDR:** buy a $50 frame, point an agent at this repo and let 'er rip! [](https://youtu.be/ZLycoUMltNI) ▶️ **Watch the video: [https://youtu.be/ZLycoUMltNI](https://youtu.be/ZLycoUMltNI)** ## Working frames

- **PF1007L / AiMOR** (firmware string contains `A33` and `PF1007L`): Allwinner A33. Many viewers of the video got this one. Use a **USB-A to USB-C** data cable; USB-C to USB-C gives no power or data. Start with [pf1007l-start-here.md](docs/pf1007l-start-here.md). It tests ADB over USB, then the network, and only then a boot patch. Its vendor app accepts root shell commands from the vendor's server, so read that page before the frame goes online. - **BIUFRAME / Synergy 10X1** (Rockchip RK3126, ADB prompt on screen): the frame in the video. Follow

目标用户

面向拥有这些相框并希望获得完全控制权的用户，以及协助他们的AI代理。

查看 README 依据

You are probably helping someone with a similar device plugged into a Mac over USB. Read this section, then follow the links for the phase you are in. Do not run anything from a device section unless the identity checks match exactly. ### Rules we learned the hard way 1. **Ask the owner before every write.** Reads are fine. Writing flash, a partition, `/system`, or sending a RAM payload to the SoC needs explicit approval for that specific action. 2. **No writes before a verified backup**: exact byte count, SHA-256, gzip readback, a check for

使用方式

通过命令行脚本（如biuframe-setup.sh）和文档指导操作，包括ADB、fastboot等工具。

查看 README 依据

[biuframe-setup-guide.md](docs/biuframe-setup-guide.md). `scripts/biuframe-setup.sh check` changes nothing and confirms the hardware matches; `backup` and `apply` do the rest. - **Skylight Calendar 150-CAL** (Rockchip RK3566): start with [next-session.md](docs/next-session.md), then [app-analysis.md](docs/app-analysis.md) for the hidden menu. The manufacturer code is intentionally not published; the doc shows where the app checks it. Check Settings → About first: firmware `D156.V0.10` ships with ADB and `su` on ([skylight-d156.md](docs/skylight-d156.md)).

| | **2. Get ADB** | Try in this order: **(1) over USB** (`adb devices`; accept any "Allow USB debugging" prompt on the screen), **(2) over the network** (`adb connect <ip>:5555`), **(3) only then** a vendor-app trick or a boot patch. The PF1007L boot patch is written from an SD card, see [pf1007l-start-here.md](docs/pf1007l-start-here.md#test-sequence). Ideally no one needs (3). For a vendor-app trick,

部署要求

需要特定的相框型号（如PF1007L、BIUFRAME、Skylight Calendar），并可能需要USB数据线、SD卡等硬件。

查看 README 依据

- **PF1007L / AiMOR** (firmware string contains `A33` and `PF1007L`): Allwinner A33. Many viewers of the video got this one. Use a **USB-A to USB-C** data cable; USB-C to USB-C gives no power or data. Start with [pf1007l-start-here.md](docs/pf1007l-start-here.md). It tests ADB over USB, then the network, and only then a boot patch. Its vendor app accepts root shell commands from the vendor's server, so read that page before the frame goes online. - **BIUFRAME / Synergy 10X1** (Rockchip RK3126, ADB prompt on screen): the frame in the video. Follow

[biuframe-setup-guide.md](docs/biuframe-setup-guide.md). `scripts/biuframe-setup.sh check` changes nothing and confirms the hardware matches; `backup` and `apply` do the rest. - **Skylight Calendar 150-CAL** (Rockchip RK3566): start with [next-session.md](docs/next-session.md), then [app-analysis.md](docs/app-analysis.md) for the hidden menu. The manufacturer code is intentionally not published; the doc shows where the app checks it. Check Settings → About first: firmware `D156.V0.10` ships with ADB and `su` on ([skylight-d156.md](docs/skylight-d156.md)).

已知限制

作者明确说明这些是特定设备的记录，并非通用刷机指南；不同批次硬件可能不同，操作前需验证。

查看 README 依据

<a href="docs/community-builds.md"><img src="docs/images/community/onurceri-36.jpg" height="90" alt="FamilyOS" title="FamilyOS"></a> Notes and scripts from getting full control of locked-down Android photo frames: getting ADB, backing up the firmware, getting root, removing the vendor app, and running our own launcher, browser and kiosk app. These are records of the units their owners tested, not universal flashing guides. ## Which frame do you have? Frames sold under the same name, even the same Amazon listing, can have different boards. Check Settings → About before you follow any guide:

- **PF1007L / AiMOR** (firmware string contains `A33` and `PF1007L`): Allwinner A33. Many viewers of the video got this one. Use a **USB-A to USB-C** data cable; USB-C to USB-C gives no power or data. Start with [pf1007l-start-here.md](docs/pf1007l-start-here.md). It tests ADB over USB, then the network, and only then a boot patch. Its vendor app accepts root shell commands from the vendor's server, so read that page before the frame goes online. - **BIUFRAME / Synergy 10X1** (Rockchip RK3126, ADB prompt on screen): the frame in the video. Follow