pLabs5/pLinux5-NG

选用指南

AI 根据 README 整理 · 2026/10/20 22:12:16

使用方式

需在PS5上设置DNS和调整系统设置后访问引导页触发越狱，再通过脚本将ELF文件发送到PS5执行。

查看 README 依据

- `settings` -> `system` -> `power saving` -> `features available in rest mode`, set `Supply Power to USB Ports` to `Always` - disable HDMI device link: - `settings` -> `system` -> `HDMI`, set `Enable HDMI Device Link` to be `off` # installation follow the [ps5-linux-loader installation guide](https://github.com/ps5-linux/ps5-linux-loader#installation) until you get to step 4, then come back here. ### running the jailbreak - set your playstations DNS to `45.56.67.85`: - `settings` -> `network` -> `settings` -> `set up internet connection` then click the `options` button on

your controller, select `advanced settings`, from there set `primary DNS` to `45.56.67.85` then select `ok`, if done correctly, you will get a popup saying `internet connection failed`, thats good, continue. - navigate to the users guide: - `settings` -> `Guide & Tips, Health and Safety, and Other Information` -> `User's Guide`. - when a popup appears saying: `the security of the page can't be confirmed...`, click `yes` - you should end up on a page with big letters saying `RELAPSE`, click the `Jailbreak` button & wait for it to finish

(`-ffreestanding -nostdlib`) and embedded as C headers; `scripts/bin2c.py` replaces `xxd -i`, which is not present in every environment. ## docker run ```shell docker buildx bake ``` the output will be at `bin/pLinux5-NG.elf`. ### sending on linux/unix, use: ```bash # (from the area with the repo + pLinux5-NG.elf) cd scripts/ chmod +x send.sh ./send.sh PS5_IP=<Playstation 5s IP> PS5_PORT=9021 ``` on windows, if using powershell, use: ```powershell .\scripts\send.ps1 -PS5IP <Playstation 5s IP> -Port 9021 ``` otherwise, if using CMD/Command Prompt, use: ```cmd

部署要求

要求PS5固件为13.20版本，并具备编译环境或使用Docker，发送过程需要网络连接和PS5的IP地址。

查看 README 依据

> [!IMPORTANT] > this project is still **VERY** Work-in-progress, currently only 13.20 is supported > until i can get offsets for other FW's / full linux support # pLinux5-NG boot linux on PS5 consoles running high firmware (8.xx through 13.60) this project is a port/rework of the existing [ps5-linux-loader](https://github.com/ps5-linux/ps5-linux-loader) (which currently works on 3.00 though 7.61) to the new [byepervisor-reborn](https://github.com/PS5Dev/Byepervisor-Reborn) hypervisor escape - the linux boot path itself (bzImage/initrd relocation, `boot_params`/e820 setup,

it finishing will be marked by elfldr starting. now download the `pLinux5-NG.elf` file from releases, or see [building](#building) to build from source, then move to [sending](#sending) # building ## locally requires the [PS5 payload SDK](https://github.com/ps5-payload-dev/sdk), the [pLabs5-SDK](https://github.com/pLabs5/pLabs5-SDK) and a C compiler: ```bash export PS5_PAYLOAD_SDK=/path/to/ps5-payload-sdk LLVM_CONFIG=/path/to/pLabs5-SDK/tools/nixos/llvm-config make -j ``` the output is `bin/pLinux5-NG.elf`. The shellcode blobs are compiled freestanding with the host `gcc`

(`-ffreestanding -nostdlib`) and embedded as C headers; `scripts/bin2c.py` replaces `xxd -i`, which is not present in every environment. ## docker run ```shell docker buildx bake ``` the output will be at `bin/pLinux5-NG.elf`. ### sending on linux/unix, use: ```bash # (from the area with the repo + pLinux5-NG.elf) cd scripts/ chmod +x send.sh ./send.sh PS5_IP=<Playstation 5s IP> PS5_PORT=9021 ``` on windows, if using powershell, use: ```powershell .\scripts\send.ps1 -PS5IP <Playstation 5s IP> -Port 9021 ``` otherwise, if using CMD/Command Prompt, use: ```cmd

已知限制

目前仅支持13.20固件，其他固件需要偏移量才能支持，项目仍处于早期开发阶段。

查看 README 依据

> [!IMPORTANT] > this project is still **VERY** Work-in-progress, currently only 13.20 is supported > until i can get offsets for other FW's / full linux support # pLinux5-NG boot linux on PS5 consoles running high firmware (8.xx through 13.60) this project is a port/rework of the existing [ps5-linux-loader](https://github.com/ps5-linux/ps5-linux-loader) (which currently works on 3.00 though 7.61) to the new [byepervisor-reborn](https://github.com/PS5Dev/Byepervisor-Reborn) hypervisor escape - the linux boot path itself (bzImage/initrd relocation, `boot_params`/e820 setup,