soniciso1/ps5-linux-loader

选用指南

AI 根据 README 整理 · 2026/10/19 11:36:34

适用场景

适用于希望将PS5改装为Linux桌面电脑，运行Steam游戏和模拟器的场景。

查看 README 依据

# ps5-linux **ps5-linux** leverages patched HV vulnerabilities to transform your **PS5 Phat, Slim and Pro** console running **3.00-7.61 or 13.60 firmwares** into a highly capable Linux PC, unlocking its full hardware potential for desktop use. Powered by 8 CPU cores (16 threads) at **3.5 GHz** and a GPU at **2.23 GHz**, it provides enough performance to run Steam games and various emulators with impressive fluidity. Features: - HDMI 4K60 video and audio output - M.2 SSD as dedicated Linux partition - All USB ports usable for peripherals - BD drive usable via custom ahci driver

使用方式

通过命令行和脚本进行安装和操作，包括使用dd命令刷写镜像、运行exploit和发送payload。

查看 README 依据

sudo usermod -aG docker $USER ``` Then clone and build: ```bash cd ~/ git clone https://github.com/ps5-linux/ps5-linux-image cd ps5-linux-image chmod +x ./build_image.sh ./build_image.sh --distro ubuntu2604 ``` The finished image is written to `output/ps5-ubuntu2604.img`. ### 2. Flash the image to USB Minimum drive size: 64 GB. An external SSD is strongly recommended. #### Linux/macOS: ```bash # check drive name with lsblk / diskutil list sudo dd if=output/ps5-ubuntu2604.img of=/dev/sdX bs=4M status=progress conv=fsync ``` #### Windows (Balena Etcher):

Download [Balena Etcher](https://etcher.balena.io/), select the `.img` file, select your USB drive, click Flash. ### 3. Plug the USB drive into your PS5 The following USB ports are supported for booting: - Front bottom Type-C port - Rear Type-A ports The front top Type-A port is USB 2.0 which is slower and thus not recommended. ### 4. Run the jailbreak #### Firmware 3.00-5.50 1. Clone via: `git clone https://github.com/idlesauce/umtx2` 2. Configure fakedns via `dns.conf` to point `manuals.playstation.net` to your PCs IP address 3. Run fake dns: `sudo python fakedns.py -c dns.conf`

sudo apt install gcc-x86-64-linux-gnu binutils-x86-64-linux-gnu ``` Either download [ps5-linux-loader.elf](https://github.com/ps5-linux/ps5-linux-loader/releases/), or install [ps5-payload-sdk](https://github.com/ps5-payload-dev/sdk) and compile it yourself: ```bash git clone https://github.com/ps5-linux/ps5-linux-loader cd ps5-linux-loader make ``` Send the payload with your `$PS5IP` (shown on the page): ```bash socat -t 99999999 - TCP:$PS5IP:9021 < ps5-linux-loader.elf ```

部署要求

需要PS5主机（特定固件版本），至少64GB的USB驱动器，以及USB键盘鼠标。

查看 README 依据

*ps5-linux* is supported on PS5 Phat and Slim on the following firmwares, and on PS5 Phat, Slim and **Pro** on 13.60: - **3.00**, **3.10**, **3.20**, **3.21** without M.2 support - **4.00**, **4.02**, **4.03**, **4.50**, **4.51** with M.2 support - **5.00**, **5.02**, **5.10**, **5.50** with M.2 support - **6.00**, **6.02**, **6.50** with M.2 support - **7.00**, **7.01**, **7.20**, **7.40**, **7.60**, **7.61** with M.2 support - **13.60** with M.2 support — **PS5 Phat, Slim and Pro** (this fork)

- **Required**: USB drive with minimum 64GB (ideally external SSD) to install and run Linux. - **Required**: USB keyboard/mouse (dongles supported too). - *Optional*: USB WLAN adapter for WLAN internet access. - *Optional*: M.2 SSD compatible on PS5 (see [official guide](https://www.playstation.com/en-us/support/hardware/ps5-install-m2-ssd)) to run Linux from SSD. - *Optional*: Bluetooth dongle to connect with PS5 DualSense controller. ## Configure PS5 settings - **VERY IMPORTANT**: Enable Rest Mode features:

已知限制

不支持双系统启动，不支持待机恢复，部分显示器存在兼容性问题，屏幕保护程序存在bug。

查看 README 依据

- A: No, this is a soft-mod. You need to re-run the exploit in order to boot into Linux. - Q: Can I put Linux into standby and resume? - A: No, this is not supported. We may however add a shutdown feature that puts your PS5 into rest-mode allowing you to relaunch Linux when powering up again. - Q: Can I continue using my PS5 if I install Linux? - A: Yes, the internal SSD is not modified - Q: Can I use the PS5's NIC/WLAN module in Linux? - A: WLAN is only supported for Marvell chipsets at the moment. Ethernet is supported on all models. - Q: Does the DualSense controller work?

- Monitor hotswap may work, but it will not change resolution automatically. - Some monitors have a black screen if a video=DP-1: parameter is set in `cmdline.txt`. Confirmed working without `video=DP-1:1920x1080@60` on: - MSI MAG274Q QD E2, DELL S2721DGF, DELL U2515H (1440p@60Hz) - Possibly also: LG 27GL850, Lenovo Legion Y27q, ViewSonic Elite XG270QG Many configurations, tips and tricks from the [AMD BC250 Documentation](https://elektricm.github.io/amd-bc250-docs/) also apply to PS5. ## Bugs - screen save does not work properly - hdmi audio output does not work on some monitors

- hdmi 1440p and 2160p video output does not work on some monitors ## Upstreamed changes During this project, we have upstreamed some changes: - [drm/amd: fix dcn 2.01 check](https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/gpu/drm/amd/display/dc?id=39f44f54afa58661ecae9c27e15f5dbce2372892) - [amd/addrlib: Add more GFX1013 GPUs](https://gitlab.freedesktop.org/mesa/mesa/-/commit/44bed00b8bbcb1825e2c920cf1a828efdc72b1f1) ## Discord